SVP HDR-106 Скачать руководство пользователя

Страница: 74 / 213

HDR-106

MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver

MANUAL 7.0

So as to introduce the key in the

BISS-1 option

, follow these steps:

Choose BISS-1 option in the Mode field.

Go one field down (CA SsWord) and press the OK button so as to be

allowed to introduce the key.

With Left, Right buttons select one field and with UP, Down buttons

choose one value from 0 to 9 or A to F.

Press OK button to set the key.

So as to introduce the key and the UserID in the

BISS-E option

, follow

these steps:

Choose BISS-E option in the Mode field.

Go one field down (CA SsWord) and press OK button so as to be

allowed to introduce the key.

With Left and Right buttons select one field and with UP and Down

buttons choose one value from 0 to 9 or A to F.

Press OK button to set the UserID.

Go another field down (CA UserID) and press OK button so as to be

allowed to introduce the key.

With Left, Right buttons select one field and with UP, Down buttons

choose one value from 0 to 9 or A to F.

Press OK button to set the key.

The receiver device is capable of distinguishing if the input signal is
encrypted or not and, because of this, the Not Encrypted option is not

available. If the input signal is not encrypted then, parameters related to
the BISS (SsWord and UserID) are not taken into account.

On the other hand, if the input signal is encrypted, the user must select the

same sort of encryption (BISS-1 or BISS-E) as the one selected in the
transmitter and the same keys used in the encryption step.

Содержание HDR-106






















































































































































































































Результаты поиска

Содержание HDR-106

Отзывы:

Похожие инструкции для HDR-106

Бренды по названию

Популярные бренды

SVP HDR-106, Руководство пользователя

Результаты поиска

Содержание HDR-106

Отзывы:

Похожие инструкции для HDR-106

Бренды по названию

Популярные бренды