SVP HDR-106, Руководство пользователя

Страница: 92 / 213

91
HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver
MANUAL 7.0
6) Once the firmware file has been downloaded, save it in a USB device.
In the USB device, the only file that can be allocated inside it is the
firmware file of the device to be updated.
7) With the equipment completely powered off ( with no power
supply ), insert the USB device in the USB connector, situated in the
rear panel.
Before introducing the USB device, remove the power supply of the
equipment.
If there is no signal introduced in the device (RF, ASI or SDI), the updating
stage will be quicker.
8)
Now, switch on the device.
9) Go to Unit menu. In case of being in the main screen, press the cross
button so as to access to the menu. There, with the Up, Down
buttons, select the Unit option.
10) Select Firmware by pressing the OK button.
11) Select Check USB Memory with the OK button.
12) Now, automatically the device updates the firmware. The screens
which are shown below display the different steps that the device is
makes while the updating process is taking place.
Don’t power off the device during the updating process.
Figure 3.78 Updating process 1
Figure 3.79 Updating process 2
FIRMWARE UPDATE
DON’T POWER OFF THE SYSTEM
Reading file 20%