SVP HDR-106 Скачать руководство пользователя страница 97

Страница: 97 / 213

HDR-106

MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver

MANUAL 7.0

When the Auto option is selected, it means that the sector antenna

is automatically selected. The selected sector is the one which is
marked with the square brackets.

II.

Manual

Figure 4.5 Sector Autotracking (Manual)

If the Manual option is selected then, by pressing the OK button the
user can select manually the sector antenna from which it is wanted

to receive the signal.

Manual option can only be selected in case there is no remote GPS signal. If
the option is configured in manual and the receiver recovers the GPS

coordinates then, the option will turn to be GPS again.

If the option selected is GPS and the device is receiving signal but the GPS
data disappears, the device will be in a tracking mode automatically. It will

stay two seconds in each sector until GPS data is received.

In case there is no GPS signal but the device is receiving the RF signal, the
device will be kept in the same sector, it will not be tracking.

III.

Config

Pressing the OK button when the Config option is selected, the user
is allowed to configure the number of the sectorial antennas, the

degrees of the sectors and if a top antenna is included.

Figure 4.6 Sector Autotracking (Config)

Using the Up, Down keys the user can change the value of each

parameter and with the Right, Left buttons the user can select the

value to be modified. So as to save the values, the OK button must
be pressed.

1 2 3 [4] 5 T Δd:---.-km Man<>

L [ ]:-- C/N [ ]:-

1 2 3 [4] 5 T Config <
Nr. Ant: 6 Deg: 75º UP:Yes Rem.GPS:AUTO

Содержание HDR-106






















































































































































































































Результаты поиска

Содержание HDR-106

Отзывы:

SVP HDR-106, Руководство пользователя, Страница: 97 / 213

Результаты поиска

Содержание HDR-106

Отзывы: