Chapter 6: Applications
User’s Manual: DR-70 Series
44
1
Introduction
The DT-02 camera transmitter is a very versatile equipment. Used together
with other SVP Broadcast Microwave equipments much more than a camera
transmitter is achieved
This equipment allows multiple configurations:
1.
On its own it is a robust, lightweight, easy-to-use camera transmitter. It
has a display and a keypad on the front panel.
2.
Together with the PA-04 amplifier, high power transmitter is achieved,
which can be use as mobile or portable transmitter.
3.
DT-02 camera transmitter has DVB-ASI Transport Stream input, this
makes posible to use it together with a PA-04 o PA-20 power amplifier as
a repeater.
This configurations offer lots of advantages:
Configuration 1: working just with the camera trasmitter. Advantages:
a.
A lightweight transmitter.
b.
The cameraman can move freely.
c.
Equipment’s parameters are configurable from the front panel
d.
With a quick look you can know which is the equipment’s status
Configuration 2: Operating together with the PA-04. Advantages:
a.
Compact and lightweight high power transmitter
b.
Installation in vehicles is not a problem because both equipments
have a wide power supply range.
c.
Both equipments have inside a DC/DC converter, so that they are
completely immune to any fluctuation or noise that the power
supply input may have. This feature is very interesting in mobile
installations, such as motorbikes, airplanes, cars ,etc.
d.
It is a very interesting pack to make live TV
e.
The status of both equipments is known at all times.
Configuration 3: Operating as a repeater together with the PA-04 or PA-20
amplifier:
a.
The ASI input the DT-02 has makes possible this configuration.
b.
A high power transmitter is achieved without a modulator
equipment.
c.
The repeater (DT-02 & PA-04/PA-20) has a reduced size.
d.
Installation in vehicles is not a problem because both equipments
have a wide power supply range.
e.
Both equipments have inside a DC/DC converter, so that they are
completely immune to any fluctuation or noise that the power
supply input may have. This feature is very interesting in mobile
installations, such as motorbikes, airplanes, cars ,etc.
