SVP DT-02 Series, Руководство пользователя

Страница: 45 / 55

Chapter 5: Local control of the equipment
User’s Manual: DT-02 Series 39
Figure 4.1 Main screen. Audio 1 enabled, audio 2 disabled
Figure 4.2 Main screen. Both audio channels (1 and 2) enabled
To display the status of every audio parameter:
1.
Using Up and Down buttons go to line no.12 in the Monitir menu.
2. Press right button to enter this submenu.
3. Next, use Up and Down buttons to monitor the different parameters.
ƒ
Line 1: Input sel (Analogue o Embedded SDI). ). This configuration
affects every input audio signal, (four input channels).
ƒ
Line 2: Audio DID: Embedded audio group identifier, for audio that are
transmitted embedded in the SDI signal.
o
Group 1=> Audio DID: 767
o
Group 2=> Audio DID: 509
o
Group 3=> Audio DID: 507
o
Group 4=> Audio DID: 761
ƒ
Line 3: Audio 1 (Enable/Disable).
ƒ
Line 4: Audio 1 Rate (128, 160, 192, 224, 256, 320, 384). bitrate
allocated for audio 1channel.
ƒ
Line 5: Audio 1 L (Mic, Line). Line or micro level
ƒ
Line 6: Audio 1 R (Mic, Line). Line or micro level
ƒ
Line 7: Audio 2 (Enable/Disable).
ƒ
Line 8: Audio 2 Rate (128, 160, 192, 224, 256, 320, 384 bitrate
allocated for audio 2channel.
ƒ
Line 9: Audio 2 L (Mic, Line). Line o micro level
ƒ
Line 10: Audio 2 R (Mic, Line). Line o level
4.13 DVB-ASI Trasport Stream input parameters
To observe the value of the parameters related to the DVB-ASI input signal:
1.
Using Up and Down arrows move to line no.10 in the Monitor menu
2. Enter it pressing right button
3. Next, use Up and Down buttons to monitor the different parameters.