Suzuki Alto800 Скачать руководство пользователя страница 98 | Manualshive

Страница: 98 / 190

Suzuki Alto800 Скачать руководство пользователя страница 98

5-5

OTHER CONTROLS AND EQUIPMENT

53MH0-74E

tion, an indicator light will come on when

the air conditioning system is on. To turn

off the air conditioning system, push the

“A/C” switch again.

• During operation of the air conditioner,

you may notice slight changes in engine

speed. These changes are normal, the

system is designed so that the compres-

sor turns on or off to maintain the

desired temperature. Less operation of

the compressor results in better fuel

economy.

NOTE:

• If you select RECIRCULATED AIR for an

extended period of time, the air in the

vehicle can become contaminated.

Therefore, you should occasionally

select FRESH AIR.

• If your vehicle has been left in the sun

with the windows closed, it will cool

faster if you open the windows briefly

while you operate the air conditioner with

the air intake selector at FRESH AIR and

the blower at high speed.

Dehumidifying

Set the air flow selector to a desired air
flow selector position, the temperature
selector to the desired temperature posi-
tion and the blower speed selector to the
desired blower speed position. Also select
FRESH AIR and turn on the “A/C” switch.

NOTE:

Because the air conditioner dehumidifies

the air, turning it on will help keep the win-

dows clear, even when blowing heated air

using the DEFROST or HEAT &

DEFROST functions.

53MH0511

NOTE:

If you need maximum defrosting:

• set the air flow selector to DEFROST,

• set the blower speed selector to high,

• adjust the temperature selector to the

hot end, and

• adjust the side outlets so the air blows

on the side windows.

Maintenance

If you do not use the air conditioner for a
long period, such as during winter, it may
not give the best performance when you
start using it again. To help maintain opti-
mum performance and durability of your air
conditioner, it needs to be run periodically.
Operate the air conditioner at least once a
month for one minute with the engine
idling. This circulates the refrigerant and oil
and helps protect the internal components.

NOTE:

Your vehicle uses the air conditioning

refrigerant HFC-134a, commonly called

“R-134a”. R-134a replaced R-12 around

1993 for automotive applications. Other

refrigerants are available, including recy-

cled R-12, but only R-134a should be used

in your vehicle.

EXAMPLE

NOTICE

Using the wrong refrigerant may

damage your air conditioning sys-

tem. Use R-134a only. Do not mix or

replace the R-134a with other refrig-

erants.

«
...
96
97
98
99
100
...
»

Содержание Alto800































































































































































































Отзывы:

Нет отзывов