Suzuki Alto800 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 190

Suzuki Alto800 Скачать руководство пользователя страница 45

2-26

BEFORE DRIVING

53MH0-74E

Air bag symbol (if equipped) meaning

57L20203

You may find this label on the sun visor.

Please refer to the “Seat Belts and Child
Restraint Systems” section in this section
for details on securing your child.

Door Lock Canceller System

(if equipped)

If SRS Airbag system is activated all doors
are unlocked automatically.

NOTE:

In case door lock wiring and/or motor are

damaged, doors may not unlock automati-

cally.

How the system works

In a frontal collision, the crash sensors will
detect rapid deceleration, and if the con-
troller judges that the deceleration rep-
resents a severe frontal crash, the
controller will trigger the inflators. The infla-
tors inflate the air bags with nitrogen or
argon gas. The inflated air bags provide a
cushion for your head and upper body. The
air bag inflates and deflates so quickly that
you may not even realize that it has acti-

vated. The air bag will neither hinder your
view nor make it harder to exit the vehicle.

Air bags must inflate quickly and forcefully
in order to reduce the chance of serious or
fatal injuries. However, an unavoidable
consequence of the quick inflation is that
the air bag may irritate bare skin, such as
the facial area. Also, upon inflation, a loud
noise will occur and some powder and
smoke will be released. These conditions
are not harmful and do not indicate a fire in
the vehicle. Be aware, however, that some
air bag components may be hot for a while
after inflation.

A seat belt helps keep you in the proper
position for maximum protection when an
air bag inflates. Adjust your seat as far
back as possible while still maintaining
control of the vehicle. Sit fully back in your
seat; sit up straight; do not lean over the
steering wheel. Please refer to the “Front
Seat” section and the “Seat Belts and
Child Restraint Systems” section in this
section for details on proper seat and seat
belt adjustments.

WARNING

Do not use a restraint on a seat pro-

tected by an airbag in front of it.

EXAMPLE

WARNING

If the AIR BAG light in the instrument

cluster ever comes on and stays on,

it means that something may be

wrong with the air bag system. If this

ever happens, have the vehicle ser-

viced immediately, because the air

bags may not offer the protection for

which they were designed.

«
...
43
44
45
46
47
...
»

Содержание Alto800































































































































































































Отзывы:

Нет отзывов