Suzuki Alto800 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 190

Suzuki Alto800 Скачать руководство пользователя страница 50

2-31

BEFORE DRIVING

53MH0-74E

If the driver’s seat belt is unbuckled when
the ignition switch is turned to the “ON”
position, this light will blink until the driver’s
seat belt is buckled.

For details about the seat belt reminder,
refer to “Seat Belts and Child Restraint
Systems” in this section.

“AIR BAG” Light (if equipped)

53M-04-074

This light blinks or comes on for several
seconds when the ignition switch is turned
to the “ON” position so you can check if the
light is working.

The light will come on and stay on if there
is a problem in the air bag system.

Malfunction Indicator Light

53M-04-075

Your vehicle has a computer-controlled
emission control system. A malfunction
indicator light is provided on the instrument
panel to indicate when it is necessary to
have the emission control system serviced.
The malfunction indicator light comes on
when the ignition switch is turned to “ON”
position to let you know the light is working
and goes out when the engine is started.

If the malfunction indicator light comes on
when the engine is running, there is a
damage with the emission control system.
Bring the vehicle to your MARUTI SUZUKI
dealer to have the damage fixed.

Also, if the light comes on, there may be
something wrong with the transaxle sys-
tem. Have the system inspected by MAR-
UTI SUZUKI authorized dealer.

Transaxle Warning Light

(if equipped)

53M-04-076

This light comes on briefly when the igni-
tion switch is turned to the “ON” position or
the engine switch is pressed to change the
ignition mode to “ON” so you can check the
light is working.
If this light comes on when the engine is
running, there is the problem with the auto-
matic transaxle system. Ask your MARUTI
SUZUKI dealer to have the system
inspected.

NOTE:

If the automated manual transaxle system

temperature becomes too high, this light

will blink. Stop the vehicle in a safe place

and let the system cool down.

WARNING

If the “AIR BAG” light does not blink

or come on briefly when the ignition

switch is turned to the “ON” position,

stays on for more than 10 seconds,

or comes on while driving, the air bag

system may not work properly. Have

both systems inspected by an

MARUT SUZUKI authorized dealer.

NOTICE

Continuing to drive the vehicle when

the malfunction indicator light is on

can cause permanent damage to the

vehicle’s emission control system,

and can affect fuel economy and

driveability.

«
...
48
49
50
51
52
...
»

Содержание Alto800































































































































































































Отзывы:

Нет отзывов