Suzuki Alto800 Скачать руководство пользователя страница 122 | Manualshive

Страница: 122 / 190

Suzuki Alto800 Скачать руководство пользователя страница 122

5-29

OTHER CONTROLS AND EQUIPMENT

53MH0-74E

USB device connection

• When connecting a USB device, make

sure that the connector is pushed all the
way into the port.

• Do not leave the USB device for long

periods of time in places inside the vehi-
cle where the temperature can rise too
high.

• Back up any important data beforehand.

We cannot accept responsibility for any
lost data.

• It is recommended not to connect a USB

device that contains data files other than
MP3/WMA/AAC format.

• We recommend against use of USB

devices that are non-standard shape
such as key chains, mobile phone
accessories, etc. which may damage or
stress the connection between USB
device and Socket terminal.

• Always close the USB socket terminal

when not in use, since entry of foreign

material, dust, water, conductive liquids
may damage the audio system or USB
device.

• Device such as MP3 player/Mobile

phone/digital camera may not be rec-
ognized

by the audio system for playing

music.

Recording MP3/WMA/AAC
files on a USB device

• Playback or display may not be possible

depending on the type of USB device in
use or the condition of the recording.

• Depending on the connected USB mem-

ory, the files may be played in different
order from the order that the files were
stored.

• During initialization, the reading time of

USB device may vary depending upon
factors such as file structure, size and
contents other than music files.

• When files recorded contains VBR (vari-

able bit rate), during playback, fast-for-
ward or reverse operation are done.

• The sound quality of MP3/WMA/AAC

files generally improves with higher bit
rate in order to achieve good sound qual-
ity recording with CBR 9continuous bit
rate) of at least 128kbps is recom-
mended.

Compression formats

MP3

• MPEG 1,2 and 2.5 layer III
• Bit rate:

– MPEG-1: 32, 44.1, 48 kHz
– MPEG-2: 16, 22.05, 24 kHz
– MPEG-2.5: 8, 12 kHz
– VBR

• Sampling frequency:

– MPEG-1: 32, 44.1, 48 kHz
– MPEG-2: 16, 22.05, 24 kHz
– MPEG-2.5: 8, 12 kHz

WMA

• Supports only v7/8/9, DRM/Professional/

Loseless/Voice are not supported

• Bit rate:48, 64, 80, 96, 128, 160, 192

kbps

• Sampling frequency:8, 16, 22.05, 32,

44.1 kHz

AAC

• MPEG AAC (Compliant with ISO/

IEC14496-12:2003 + iTunes Meta-data
Specification)

• Bit rate: up to 320kbps
• Sampling frequency:8/11.025/12/16/

22.05/24/32/44.1/48 kHz

• Sampling frequency:8/11.025/12/16/

22.05/24/32/44.1/48 kHz

Maximum number of files/folders

• Maximum number of files: 65280 (files +

folders)

• Maximum number of files in a folder: 256
• Maximum depth of tree structure: 8
• Maximum number of folders: 255

(Root folder is included.)

«
...
120
121
122
123
124
...
»

Содержание Alto800































































































































































































Отзывы:

Нет отзывов