Suzuki Alto800 Скачать руководство пользователя страница 125

Страница: 125 / 190

5-32

OTHER CONTROLS AND EQUIPMENT

53MH0-74E

iPod® menu mode

1) Press the MENU button (5).
2) Press the Up button (8) or Down button

(7) to select the category as follow:

3) Press the ENTER button (6) to select

the category.

4) repeat the step 2 and 3 again to select

the desired.

53M-07-081

About resume play

When connecting iPod to car stereo, iPod

will start playing the song which played

before connecting (resume play). When

browse items or lists are changed from

resume play, selected song of playlist

starts to play and list title also can be dis-

played.

NOTE:

After entering iPod menu mode, the mode
has 30 seconds timeout.

About iPod

Before using iPod

• iPod is only private usage and may not

be used without authorities. Copyright

privacy is against the law.

• Operating may be different for each iPod

software version.

How to connect iPod

• Connect the iPod cable into USB inser-

tion

slot.

Caution for connecting iPod

• When iPod EQ setting is ON, sound may

be distorted.

• Before or after connecting, setting (such

as shuffle, repeat and etc.) may be

changed.

• Remove all equipments, (headphone

etc.) when connecting.

• *iPod may have difficulty of operation.

• Do not leave iPod inside vehicle. Direct

sunlight and high temperature may cau

se damage to iPod.

• Fix iPod at specified way when using the

adapter. Removing iPod may interfere

with your driving, so accident may occur.

• Read iPod manual for iPod operation.

• When connecting iPod (video), play

music once, turn the power off and con-

nect. If video is playing before connec-

tion, it may take some time.

Содержание Alto800































































































































































































Результаты поиска

Содержание Alto800

Отзывы:

Похожие инструкции для Alto800

Бренды по названию

Популярные бренды

Suzuki Alto800, Руководство пользователя

Результаты поиска

Содержание Alto800

Отзывы:

Похожие инструкции для Alto800

Бренды по названию

Популярные бренды