manualshive.com logo in svg

Suzuki Alto800, Руководство пользователя


Поделиться
Скачать
background image

0-5

82PH0-74E

EMISSION WARRANTY POLICY

Maruti Suzuki offers the Emission Warranty on all Maruti Suzuki
vehicles (apart from the Regular Warranty and will run parallel to
the regular product warranty) only in four metropolitan cities 

(New

Delhi, Kolkata, Mumbai and Chennai)

 with effect from July 1st,

2001.

Terms:

The Emission Warranty will be applicable for 

80,000 kms or 3

years

 (Whichever comes earlier) from the date of invoice to the

first owner. The remaining warranty terms will be valid in case of
any change in ownership provided the production of all valid docu-
ments.

Conditions:

1. Under Emission Warranty, Warranty claims will be admitted for

a prima facie examination, in case vehicle fails to meet the
Emission Standard as specified in sub rule (2) of rule no. 115
of Central Motor Vehicles Rules (CMVR), 1989.

2. The warranty claims will only be accepted after examination

carried out by Maruti Suzuki or it’s dealer which leads to firm
conclusions that the

a) Original settings have not been tampered in any case. 
b) Part (as given in Annexure - A) has a manufacturing defect. 
c) Vehicle is unable to meet the Emission Standards (as given

in 1.), inspite of the vehicle having been maintained and
used in accordance with the instructions as specified in
Owner’s Manual and Service Booklet and the used fuel and
different oils (Engine oil, Transmission oil, Brake oil etc.) are
also as per specification. 

3. The method of examination for deciding the warranty of the

parts will be at the sole discretion of Maruti Suzuki and it’s
dealer and results of the examination will be final and binding.
If after examination, the warrantable condition is not estab-
lished, Maruti Suzuki and it’s dealer has the right to charge all,
or part of the cost of such examination.

4. Under Emission Warranty, the parts (as given in Annexure - A)

will be changed free of cost, but the consumables will be
charged as per actual.

5. If the part covered under Emission Warranty or the associated

parts, are not independently replaceable, on account of these
being integral parts of a complete assembly, Maruti Suzuki and
it’s dealer will have the sole discretion to replace either the
entire assembly or by using some of the parts of the system
through suitable repairs or modifications.

6. Any consequential repairs or replacement of parts which may

be found necessary to establish compliance of Emission War-
ranty, will not be considered under warranty, unless the same is
under product warranty. The consumable will be charged as
per actual under such repair or replacement.

7. Maruti Suzuki will not be responsible for the cost of transporta-

tion of the vehicle to the nearest Maruti Suzuki dealer work-
shop or any loss due to non-availability of the vehicle during
the period of lodging of a warranty claim and examination and/
or repair by Maruti Suzuki dealer.

8. Maruti Suzuki will not be responsible for any penalty that may

be charged by statutory authorities on account of failure to
comply with the EMISSION STANDARDS.

9. Emission Warranty will not be affected on the change of owner,

provided all the documents are available.

Содержание Alto800































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Alto800

Mazda 2011 Tribute Brochure & Specs preview
2011 Tribute
Бренд: Mazda Страницы: 4
Jeep UNIVERSAL CJ-2A Operation Data preview
UNIVERSAL CJ-2A
Бренд: Jeep Страницы: 27
Jeep RENEGADE 2016 User Manual preview
RENEGADE 2016
Бренд: Jeep Страницы: 228
Jeep PATRIOT 2013 User Manual preview
PATRIOT 2013
Бренд: Jeep Страницы: 108
Jeep PATRIOT 2013 Owner'S Manual preview
PATRIOT 2013
Бренд: Jeep Страницы: 525
Lancia THESIS CONNECT Owner'S Handbook Manual preview
THESIS CONNECT
Бренд: Lancia Страницы: 386
FABBRI PORTATUTTO 17405400 Assembly Instructions preview
17405400
Бренд: FABBRI PORTATUTTO Страницы: 2
3SIXT 3S-1186 Operating Instructions Manual preview
3S-1186
Бренд: 3SIXT Страницы: 12
Conrad 75 16 30 Operating Instructions Manual preview
75 16 30
Бренд: Conrad Страницы: 26
Ford 2003 Thunderbird Owner'S Manual preview
2003 Thunderbird
Бренд: Ford Страницы: 200
Yakima StickUp Installation Instructions Manual preview
StickUp
Бренд: Yakima Страницы: 21
Gatorback Mudflaps GCR53F Mounting Diagram & Instructions preview
GCR53F
Бренд: Gatorback Mudflaps Страницы: 4
Enduro autoSteady AS101 User Manual preview
autoSteady AS101
Бренд: Enduro Страницы: 48
FALCON RIDGE HU-4421-XL-SDK01 Instructions For Installation And Care preview
HU-4421-XL-SDK01
Бренд: FALCON RIDGE Страницы: 5
Draw tite 24963 Installation Instructions preview
24963
Бренд: Draw tite Страницы: 4
EFILive CM2350B User Manual preview
CM2350B
Бренд: EFILive Страницы: 25
PEUGEOT 108 2017 Vehicle Instruction Card preview
108 2017
Бренд: PEUGEOT Страницы: 17
Linear Logic scangauge2 Quick Start Manual preview
scangauge2
Бренд: Linear Logic Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды