Suzuki Alto800 Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 190

Suzuki Alto800 Скачать руководство пользователя страница 72

3-9

OPERATING YOUR VEHICLE

53MH0-74E

76MH0A055

Depress brake pedal indicator

(if equipped)

76MH0A047

This light will come on if you do not
depress the brake pedal in the following
situations.
• When starting the engine.
• When the engine is on and the gearshift

lever is shifted from “N” position to “D”,
“M” or “R” position.

• When the ignition switch is in the “ON”

position and the engine is off, the gear-
shift lever is shifted into any position.

Starting the engine

When starting the engine, always place the
gearshift lever in the “N” position and
depress the brake pedal firmly. The engine
cannot be started unless the gearshift
lever is in the “N” position and the brake
pedal is depressed.

76MH0A056

Clutch operation

You can select either the Drive (D) mode or
the Manual (M) mode. Since this vehicle
controls clutch operation electronically in
either mode, you do not need to operate
the clutch.

Creeping function

This vehicle has a creeping function that
helps the vehicle to start smoothly by
engaging the clutch. When the gearshift
lever is in any of the positions “D”, “M” or
“R”, and you release your foot from the
brake pedal, the vehicle starts slowly with-
out depressing the accelerator pedal. The
creeping function is disabled if you depress
the brake pedal or pull up the parking
brake lever.

NOTE:

If the driver’s door is opened and/or the

parking brake lever is engaged with the

gear in the “M”, “D” or “R” position, the

creeping function will not operate.

Parking and Stopping the vehicle

Automated manual transaxle does not
have a parking position. The vehicle can
be parked with the gearshift lever in any
position. When stopping the vehicle, the
gear will be shifted to 1st.

Drive (D) mode

When the Drive (D) mode is activated, the
most appropriate gear position is automati-
cally selected upon operation of the accel-
erator pedal and variation of vehicle speed.

Normal driving:

1) Start the engine as instructed in “Start-

ing the engine” in this section.

2) With your foot on the brake pedal, shift

the gearshift lever to the “D” position.
When the gearshift lever is shifted to
the “D” position, the gear will be shifted
to 1st.

R

N

D

-

M

+

R

N

D

-

M

+

EXAMPLE

NOTICE

A buzzer will sound continuously if

the vehicle is operated with the gear-

shift lever in-between of each shift

positions. The vehicle will become

inoperative if you continue to operate

the vehicle with the gearshift lever in

between shift positions.

«
...
70
71
72
73
74
...
»

Содержание Alto800































































































































































































Отзывы:

Нет отзывов