3.30. Time and date
You set time and date during the initial startup of your watch. After this, your watch uses GPS
time to correct any
offset.
You can manually adjust time and date from the settings under
GENERAL
»
Time/date
where
you can also change time and date formats.
In addition to the main time, you can use dual time to follow the time at a
different
location, for
example, when you are traveling. Under
General
»
Time/date
, tap
Dual time
to set the time
zone by selecting a location.
3.30.1. Alarm clock
Your watch has an alarm clock that can sound once or repeat on
specific
days. Activate the
alarm from the settings under
General
»
Time/date
»
Alarm
.
To set an alarm:
1. First select how often you want the alarm to sound. The options are:
•
Once
: alarm sounds once in the next 24 hours at the set time
•
Weekdays
: alarm sounds at the same time Monday thru Friday
•
Daily
: alarm sounds at the same time every day of the week
2. Set the hour and minutes and then exit the settings.
When the alarm sounds, you can dismiss it to end the alarm, or you can select the snooze
option. The snooze time is 10 minutes and can be repeated up to 10 times.
If you let the alarm continue to sound, it will automatically snooze after 30 seconds.
3.31. Tones and vibration
Tones and vibration alerts are used for
notifications,
alarms and other key events and actions.
Both can be adjusted from the settings under
General
»
Tones
.
For each, you can select from the following options:
•
All on
: all events trigger an alert
•
All
off
: no events trigger alerts
Suunto Spartan Trainer Wrist HR
35
