Supero X9DBL-3, Руководство пользователя

Страница: 30 / 113

2-6
X9DBL-i/3/iF/3F Motherboard User’s Manual
Warning : Please save the plastic cap. The motherboard must be shipped with the
plastic cap properly installed to protect CPU socket pins. Shipping without the plastic
cap properly installed will cause damage to the socket pins.
3. Hold the plastic cap at its north and south center edges to remove it from the
CPU socket.
4. After removing the plastic cap, hold the CPU at the north and south center
edges with your thumb and index finger.
5. Align the CPU key, a semi-circle cutout, against the socket key, which is the
notch below the gold color dot on the side of the socket.
6. Align Pin 1 on the CPU with Pin 1 on the CPU socket.
7. Once both CPU and the socket are aligned, carefully lower the CPU straight
down into the socket. (To avoid damaging the CPU or the socket, do not rub
the CPU against the surface of the socket or its pins.)
8. With the CPU inside the socket, inspect the four corners of the CPU to make
sure that the CPU is properly installed.
9. Once the CPU is securely seated on the socket, lower the CPU load plate to
the socket.
10. Use your thumb to gently push the socket clip down to the clip lock.