Supero X9DBL-3, Руководство пользователя

Страница: 33 / 113

Chapter 2: Installation
2-9
JD1
JPW1
JIPMB1
LED3
T-SGPIO1 T-SGPIO2
JSTBY1
J9
JBT1
JPI2C1
JF1(FP Control)
TPM/Port80
JL1
JI2C1
JI2C2
JOH1
LED1
JWP1
JBR1
JPME1
JVRM_I2C1 JVRM_I2C2
JPG1
JPB1
JPL1
JPL2
JCPUVRD_SMB
I-SATA1
I-SATA0
S-SATA/
SAS0
1
7
I-SATA2
I-SATA3
I-SATA4
I-SATA5
BT1
SP1
FAN4
FAN1
FAN2
FAN5
FANA
FAN3
JPW2
JPW3
SCU- SGPIO1
USB2/3
USB4/5
KB/MOUSE
CPU1 SLOT2 PCI-E 3.0 X4(IN X8)
CPU1
P2-DIMM1F P2-DIMM1E P2-DIMM1D
P1-DIMM1B P1-DIMM1A
P1-DIMM1C
LAN2
CPU2 SLOT3 PCI-E 3.0 X8
CPU2 SLOT5 PCI-E 3.0 X8
CPU2 SLOT4 PCI-E 3.0 X8
CPU1 SLOT6 PCI-E 3.0 X16
SLOT1 PCI 33MHZ
USB6
IPMI_LAN
VGA COM1
USB0/1
LAN1
COM2
CPU2
JWD1
BIOS
Battery
LAN CTRL LAN CTRL
BMC CTRL
CPLD
Intel PCH
X9DBL-i/3 (F)
Rev. 1.01
LED2
JUIDB1
SCU- SGPIO2
S-SATA/
SAS1
S-SATA/
SAS2
S-SATA/
SAS3
S-SATA/
SAS4
S-SATA/
SAS5
S-SATA/SAS6
S-SATA/
SAS7
Release Tabs
Notches
2-4 Installing and Removing the Memory Modules
Note
: Check Supermicro's website for recommended memory modules.
CAUTION
Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage.
Installing & Removing DIMMs
1. Insert the desired number of DIMMs into the memory slots, starting with P1-
DIMM #1A. (For best memory performance, please use the modules of the
same type and speed in the same bank.)
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
Removing Memory Modules
Reverse the steps above to remove the DIMM
modules from the motherboard.
3. Align the DIMM module key with the receptive point on the memory slot.
4. Align the notches on both ends of the module with the receptive points on
ends of the slot.
5. Use two thumbs together to press the notches of the module straight down
into the slot until the module snaps into place.
6. Press the release tabs to the locked positions to secure the DIMM module
into the slot.
Press both notches straight
down into the memory slot at
the same time.