Supero X7SB3, Руководство пользователя

Страница: 27 / 101

Chapter 2: Installation
2-5
Warning : Please save the plastic PnP cap. The motherboard must
be shipped with the PnP cap properly installed to protect the CPU
socket pins. Shipment without the PnP cap properly installed will
cause damage to the socket pins.
Socket Key
(Socket Notch)
South
Center
Edge
North
Center
Edge
Load Lever
CPU in the
CPU socket
Plastic cap is
released from
the load plate
if the CPU
properly in-
stalled.
Align CPU Pin1 (the CPU corner 1.
marked with a triangle) against the
socket corner that is marked with a
triangle cutout.
Align the CPU key that is the 2.
semi-circle cutout below a gold dot
against the socket key, the notch
on the same side of the triangle
cutout on the socket.
Once aligned, carefully lower the 3.
CPU straight down to the socket.
(Do not drop the CPU on the
socket. Do not move the CPU
horizontally or vertically. Do not
rub the CPU against the surface
or against any pins of the socket
to avoid damage to the CPU or
the socket.)
With the CPU installed in the 4.
socket, inspect the four corners of
the CPU to make sure that the CPU
is properly installed. Then, close
the load plate.
Use your thumb to gently push the 5.
load lever down to lock it.
If the CPU is properly installed into 6.
the socket, the plastic cap will be
automatically released from the
load plate when the clip is pushed
in the clip lock. Remove the plastic
cap from the motherboard.
CPU Key (semi-
circle cutout)
below the circle.
CPU Pin1
Corner with a
triangle cutout
gold dot
Loading the Processor into the Socket
!