Supero X7SB3, Руководство пользователя

Страница: 62 / 101

3-4
X7SB3/X7SB3-F User's Manual
newer than your BIOS before downloading. You may choose the zip file or the
.exe file. If you choose the zipped BIOS file, please unzip the BIOS file onto a
bootable device or a USB pen/thumb drive. To flash the BIOS, run the batch
file named "flash.bat" with the new BIOS .rom file from your bootable device or
USB pen/thumb drive. Use the following format:
F:\> flash xxxxxxxx.rom <Enter>
Note: Be sure to insert a space immediately after "flash" and use only the file
named “flash.bat” to update the BIOS.
When completed, your system will automatically reboot. If you choose the .exe
file, please run the .exe file under Windows to create the BIOS flash floppy disk.
Insert the floppy disk into the system you wish to flash the BIOS. Then, boot
the system to the floppy disk. The BIOS utility will automatically flash the BIOS
without any prompts. Please note that this process may take a few minutes to
complete. Do not be concerned if the screen is paused for a few minutes.
Warning
: Do not shut down or reset the system while updating the BIOS to
prevent possible system boot failure!
When the BIOS flashing screen is completed, the system will reboot and will
show “Press F1 or F2”. At this point, you will need to load the BIOS defaults.
Press <F1> to go to the BIOS setup screen, and press <F9> to load the default
settings. Next, press <F10> to save and exit. The system will then reboot.
Note: The SPI BIOS chip installed on this motherboard is not removable. To
repair or replace a damaged BIOS chip, please send your motherboard to RMA
at Supermicro for service.
Question: What's on the CD that came with my motherboard?
Answer: The supplied compact disc has quite a few drivers and programs
that will greatly enhance your system. We recommend that you review the CD
and install the applications you need. Applications on the CD include chipset
drivers for the Windows OS, and security and audio drivers.
Question: When installing the Intel Matrix Storage Manager (MSM), it stops in
the middle of installation and cannot continue, why?
Answer: If you are configuring this motherboard as a stand-alone unit, it
means that you are unintentionally installing the complete version of MSM. The
complete version looks of an IPMI server for validation, which it cannot find.
Simply restart the MSM installation and select Custom Install => Standalone.