Supero SuperWorkstation 5035G-T, Руководство пользователя

Страница: 43 / 108

Chapter 5: Advanced Motherboard Setup
5-15
Wake-On-LAN
The Wake-On-LAN header is des-
ignated WOL on the motherboard.
See the table on the right for pin
defi nitions. You must enable the ap-
propriate setting in BIOS to use this
function. (You must also have a LAN
card with a Wake-On-LAN connector
and cable to use this feature.)
Universal Serial Bus (USB)
There six Universal Serial Bus ports
located on the I/O panel and two ad-
ditional USB headers located on the
motherboard. The headers, labeled
J12, can be used to provide front side
USB access (cables not included).
See the table on the right for pin
defi nitions.
Universal Serial Bus
Pin Defi nitions (USB)
USB0 -USB6
Pin # Defi nition USB7
Pin # Defi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 N/A 5 Key
Wake-On-LAN
Pin Defi nitions (WOL)
Pin# Defi nition
1 +5V Standby
2 Ground
3 Wake-up
LAN (Ethernet Port)
An Ethernet port (designated LAN and
JLAN2) are located beside the VGA
port on the I/O backplane. These ports
accept RJ45 type cables.
Wake-On-Ring
The Wake-On-Ring header is designated
JWOR. This function allows your computer
to receive and be "awakened" by an incom-
ing call when in the suspend state. See the
table on the right for pin defi nitions. You
must also have a WOR card and cable to
use this feature.
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin# Defi nition
1 Ground (Black)
2 Wake-up