Supero SuperWorkstation 5035G-T, Руководство пользователя

Страница: 22 / 108

3-2
S
UPER
W
ORKSTATION 5035G-T User's Manual
3-3 Control Panel LEDs
The control panel located on the front of the SC733T-450 chassis has four LEDs.
These LEDs provide you with critical information related to different parts of the
system. This section explains what each LED indicates when illuminated and any
corrective action you may need to take.
Power: Indicates power is being supplied to the system's power supply units.
This LED should normally be illuminated when the system is operating.
HDD: Channel activity for all HDDs. This light indicates SATA and (if present)
CD-ROM drive activity when fl ashing.
NIC: Indicates network activity on the Gigabit LAN when fl ashing.
Overheat/Fan Fail: When this LED fl ashes it indicates a fan failure. When
on continuously (on and not fl ashing) it indicates an overheat condition, which
may be caused by cables obstructing the airfl ow in the system or the ambient
room temperature being too warm. Check the routing of the cables and make
sure all fans are present and operating normally. You should also check to make