Supero SuperWorkstation 5035G-T, Руководство пользователя

Страница: 17 / 108

Chapter 2: System Installation
2-1
Chapter 2
System Installation
2-1 Overview
This chapter provides a quick setup checklist to get your SuperWorkstation 5035G-
T up and running. Following the steps in the order given should enable you to
have the system operational within a minimal amount of time. If your system is
not already fully integrated with a motherboard, processor, system memory etc.,
please turn to the chapter or section noted in each step for details on installing
specifi c components.
2-2 Unpacking the System
You should inspect the box the SuperWorkstation 5035G-T was shipped in and note
if it was damaged in any way. If the server itself shows damage, you should fi le a
damage claim with the carrier who delivered it.
Decide on a suitable location for setting up and operating the SuperWorkstation
5035G-T. It should be situated in a clean, dust-free area that is well ventilated.
Avoid areas where heat, electrical noise and electromagnetic fi elds are generated.
You will also need it placed near a grounded power outlet.
Once the SuperWorkstation 5035G-T is placed in the appropriate location, slide the
locking tabs on each caster down to keep it stationary.
! !
Warnings and Precautions!
- Ensure that the caster wheels on the workstation are locked.
- Review the electrical and general safety precautions in Chapter 4.
- Use a regulating uninterruptible power supply (UPS) to protect the server from
power surges, voltage spikes and to keep your system operating in case of a power
failure.
-
Allow the power supply units and hot-swap Serial ATA drive to cool before touching
them.
-
To maintain proper cooling, always keep all chassis panels closed and all SATA
carriers installed when not being serviced.