Supero SuperWorkstation 5035G-T, Руководство пользователя

Страница: 37 / 108

Chapter 5: Advanced Motherboard Setup
5-9
5-7 Adding PCI Add-On Cards
The SC733T-450 chassis can accommodate all seven PCI expansion slots on the
PDSGE being populated with cards. To install an add-on card, begin by remov-
ing the PCI slot shield for the slot you wish to populate. Fully seat the card into
the card slot on the motherboard, pushing down with your thumbs evenly on both
sides of the card. Finish by using a screw to secure the top of the card shield to
the backpanel of the chassis. The PCI slot shields protect the motherboard and its
components from EMI and aid in proper ventilation, so make sure there is always
a shield covering each unused PCI-E/PCI-X/PCI slot.
To Install: Insert module vertically and press down until it snaps into place. Pay attention to the bottom
notches.
To Remove: Use your thumbs to gently push each release tab outward to free the DIMM from the
slot.
Figure 5-3. DIMM Installation
Note: Notches
should align
with their
receptive points
on the slot
Notch
Notch
Release
Tab
Release
Tab