Supero SuperServer 6027PR-HC1FR, Руководство пользователя

Страница: 66 / 138

5-18
SUPERSERVER 6027PR-HC1(R/TR/FR) USER'S MANUAL
Trusted Platform Module Header
The JTPM1 header is used to connect
a Trusted Platform Module (TPM),
available separately from a third-party
vendor. A TPM is a security device that
allows encryption and authentication of
hard drives, disallowing access if the
TPM associated with it is not installed
in the system. See the table on the
right for pin definitions.
TPM/Port 80 Header (JTPM1)
Pin Definitions
Pin# Definition Pin# Definition
1 LCLK 2 GND
3 LFRAME# 4 <(KEY)>
5 LRESET# 6 +5V (X)
7 LAD 3 8 LAD 2
9 +3.3V 10 LAD1
11 LAD0 12 GND
13 SMB_CLK4 14 SMB_DAT4
15 +3V_DUAL 16 SERIRQ
17 GND 18 CLKRUN# (X)
19 LPCPD# 20 LDRQ# (X)
IPMB I
2
C SMB
A System Management Bus header
for the IPMI slot is located at JIPMB1.
Connect an appropriate cable here to
use the IPMB I
2
C connection on your
system.
SMB Header
(JIPMB1)
Pin Definitions
Pin# Definition
1 Data
2 Ground
3 Clock
4 No Connection
DOM Power Connector
A power connector for SATA DOM
(Disk_On_Module) devices is located
at JSD1. Connect an appropriate cable
here to provide power for your SATA
DOM devices.
DOM PWR (JSD1)
Pin Definitions
Pin# Definition
1 +5V
2 Ground
3 Ground
Fan Header
Pin Definitions
Pin# Definition
1 Ground
2 +12V
3 Tachometer
4 Firmware Thermal Control
Fan Headers
This serverboard has two system/
CPU fan headers (Fan 3/Fan 4) on the
serverboard. These 4-pin fans headers
are backward compatible with the
traditional 3-pin fans. The fan speeds
are controlled by firmware thermal
management via IPMI 2.0. See the
table on the right for pin definitions.