Supero SuperServer 5017GR-TF, Руководство пользователя

Страница: 49 / 100

Chapter 5: Advanced Motherboard Setup
5-17
Serial Ports
One COM port (COM1) is provided on
the motherboard, located on the I/O
backpanel. See the table on the right
for pin defi nitions.
Serial Ports-COM1/COM2
Pin Defi nitions
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 N/A
IPMI Port
In addition to the two Ethernet ports
(LAN1/LAN2) this motherboard also
features a dedicated IPMI port. This
provides remote system management
access through a standard IP protocol
network.
Unit Identifi er Switch (UID)
The Unit ID switch is located on the
I/O backpanel. When the Unit ID
switch is turned on, both the blue rear
Unit ID LED and front panel Unit LED
on JF1 (if attached to the front Unit
ID LED on the chassis) will activate.
Push the Unit ID switch again to turn
off both Indicators. These Unit ID LED
indicators provide easy identifi cation
of the system unit when installed in a
server cabinet for instance.
Fan Header
Pin Defi nitions
Pin# Defi nition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWM_Control
Fan Headers
The X9SRG-F series has eight fan
headers (Fan 1~Fan 4 and Fan A~Fan
D). These are 4-pin fan headers with
pins 1-3 being backward compatible
with traditional 3-pin fans. It is recom-
mended that 4-pin fans are used to
allow the fan speed control setting
(via IPMI) to automatically adjust fan
speeds based on the system tempera-
ture. Refer to the table on the right for
pin defi nitions.
Fan Header
Recommended Usage
Fan# Defi nition
1~4 CPU/System
A~D I/O & Addon Cards