Supero SuperServer 5017GR-TF, Руководство пользователя

Страница: 47 / 100

Chapter 5: Advanced Motherboard Setup
5-15
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Control-
ler) LED connection for LAN ports 1
and 2 are located on pins 11 and 12
and pins 9 and 10 of JF1, respectively.
Attach NIC LED cables to the NIC1
and NIC2 LED indicators to display
network activity. Refer to the table on
the right for pin defi nitions.
LAN1/LAN2 LED
Pin Defi nitions (JF1)
Pin# Defi nition
9/11 Vcc
10/12 Ground
Unit ID LED
Pin Defi nitions (JF1)
Pin# Defi nition
7 Vcc
8 UID LED
Unit ID LED (Front Panel)
Connect a cable to the Unit ID connec-
tion on pins 7 and 8 of JF1 to connect
to the Unit ID LED on the chassis. The
Unit ID LED is used together with the
Unit ID (UID) Switch (see 2-16).
NIC LED
Status
State Defi nition
Off No Activity
Blinking NIC Busy
Unit ID LED
Status
State Defi nition
Off UID Off
On UID On
Power LED
The Power LED connection is located
on pins 15 and 16 of JF1. Refer to the
table on the right for pin defi nitions.
Power LED
Pin Defi nitions (JF1)
Pin# Defi nition
15 +5V
16 Ground
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. Attach a
cable here to indicate the status of
HDD-related activities, including IDE,
SATA activities. See the table on the
right for pin defi nitions.
HDD LED
Pin Defi nitions (JF1)
Pin# Defi nition
13 +5V
14 HD Active
Power LED
Status
State Defi nition
Off System Off
On System Running
HDD LED
Status
State Defi nition
Off No Activity
Blinking HDD Busy
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Refer
to the table on the right for pin defi ni-
tions.
PWR Fail LED
Pin Defi nitions (JF1)
Pin# Defi nition
5 Vcc
6 Ground
Power Fail LED
Status
State Defi nition
Off Normal
On Power Failure