Supero SuperServer 5017GR-TF, Руководство пользователя

Страница: 55 / 100

Chapter 5: Advanced Motherboard Setup
5-23
5-11 SATA Ports
SATA Port
Pin Defi nitions
Pin # Defi nition
1 Ground
2 TXP
3 TXN
4 Ground
5 RXN
6 RXP
7 Ground
Power On
The Power On LED is located at LE1
on the motherboard. When LE1 is
on, it means that the AC power cable
is connected, the power supply hard
switch and soft switch are on, and the
system is running.
Power On LED (LE1)
LED Status
Status Defi nition
Off System Off or Standby Power
On System is On/Running
IPMI Heartbeat LED
An IPMI Heartbeat LED is located
at BD1. When BD1 blinks, it means
that IPMI is enabled and functioning
properly.
IPMI Heartbeat LED (BD1)
LED Settings
Green: Blinking IPMI is ready for use
Off IPMI Disabled
Unit ID LED
The Unit ID LED is used to indicate
that the Unit ID switch has been
activated.
Unit ID LED (LE2)
LED Settings
Blue: Steady Unit ID Switch is On
Off Unit ID Switch is Off
SATA Ports (I-SATA & SCU)
Six SATA ports (I-SATA 0~5) are
located on the motherboard. I-SATA
0/1 supports data transfer rates of up
to 6Gb/s (SATA 3.0), while I-SATA 2~5
supports data transfer rates of up to
3Gb/s (SATA 2.0). Please see the pin
defi nitions on the right table.
In addition to these six SATA ports,
four additional SATA ports (3Gb/s, via
SCU) are also located on the X9SRG-
F series (SCU 1~4).