Supero SUPERSERVER 5015B-T Скачать руководство пользователя страница 81

Страница: 81 / 102

Chapter 7: BIOS

7-19

Hardware Monitoring

CPU Temperature

CPU Overheat Temperature

This option indicates the CPU temperature overheat threshold that will activate

the alarm system when the CPU temperature reaches this pre-set temperature

threshold. The options are

C, 85

C, and 90

(Note)

Highlight this and hit <Enter> to see monitor data for the following items:

CPU Temperature

System Temperature

CPU Fan/Fan 1 to Fan 6

If the feature of Auto Fan Control is enabled, the BIOS will automatically display

the status of each fan as speciﬁ ed.

Fan Speed Control Modes

This feature allows the user to decide how the system controls the speeds of the

onboard fans. The CPU temperature and the fan speed are correlative. When the

CPU on-die temperature increases, the fan speed will also increase, and vice

versa. If the option is set to 3-pin fan, the fan speed is controlled by voltage. If the

option is set to 4-pin, the fan speed will be controlled by Pulse Width Modulation

(PWM). Select 3-pin if your chassis came with 3-pin fan headers. Select 4-pin if

your chassis came with 4-pin fan headers. Select Workstation if your system is

used as a Workstation. Select Server if your system is used as a Server. Select

Disable to disable the fan speed control function to allow the onboard fans to

constantly run at the full speed (12V). The Options are:

1. Disable

, 2. Optimized

Server w/3-pin, 3. Optimized Workstation w/3-pin, 4. Optimized Server w/4-pin

and 5. Optimized Workstation w/4-pin.

Voltage Monitoring

The following items will be monitored and displayed:

Vcore A, MCH Core, -12V, VDIMM, +3.3V, +12V, +5Vsb, +5VDD, P_VTT, Vbat

Note:

In the Windows OS environment, the Supero Doctor III settings take

precedence over the BIOS settings. When ﬁ rst installed, Supero Doctor III adopts

the temperature threshold settings previously set in the BIOS. Any subsequent

changes to these thresholds must be made within Supero Doctor, since the SD

III settings override the BIOS settings. For the Windows OS to adopt the BIOS

temperature threshold settings, please change the SDIII settings to be the same

as those set in the BIOS.

Содержание SUPERSERVER 5015B-T







































































































Результаты поиска

Содержание SUPERSERVER 5015B-T

Отзывы:

Похожие инструкции для SUPERSERVER 5015B-T

Бренды по названию

Популярные бренды

Supero SUPERSERVER 5015B-T, Руководство пользователя

Результаты поиска

Содержание SUPERSERVER 5015B-T

Отзывы:

Похожие инструкции для SUPERSERVER 5015B-T

Бренды по названию

Популярные бренды