Supero SUPERSERVER 5015B-T, Руководство пользователя

Страница: 62 / 102

6-8
S
UPER
S
ERVER 5015B-T User's Manual
6-5 Power Supply
The SuperServer 5015B-T has a single 260 watt power supply. This power supply
has the capability of operating at 100 or 240 input volts. Depress the main power
button on the front of the chassis and then unplug the AC power cord to completely
remove power from the system before removing the power supply.
Power Supply Failure
If the power supply unit fails, the system will shut down and you will need to replace
the power supply unit. Replacement units can be ordered directly from Supermicro
(PWS-0055 - see contact infomation in Chapter 1).
Removing/Replacing the Power Supply
Removing the power supply
First unplug the power cord from the system.
Remove the two screws on the back of the power supply, which secure it to
the chassis.
Lift the unit straight out of the chassis.
Installing a New Power Supply
Replace the failed unit with another unit of the same wattage.
Carefully insert the new unit into position in the chassis and secure it with the
two screws at the rear of the unit.
Before reconnecting the power cord, make sure the power switch on the
power supply is in the off position. Then reconnect the power cord, replace
the chassis top cover and push the unit back into the rack.
Turn on the power switch on the power supply, and then depress the power
button on the front of the system.
1.
2.
3.
1.
2.
3.
4.