Supero SuperServer 4027GR-TR, Руководство пользователя

Страница: 94 / 135

Chapter 6: Advanced Chassis Setup
6-9
6-7 Power Supply
The 4027GR-TR/TRT has four redundant, high-ef fi ciency 1600 Watt power supplies.
These power supplies are auto-switching capable, enabling it to automatically sense
and operate at a 100v to 240v input voltage. An amber light will be illuminated on
the power supply when the power is off. An illuminated green light indicates that
the power supply is operating.
Power Supply Replacement
In the event that one of the power supplies needs to be replaced, one power supply
can be removed without powering-down the system. Replacement power supply
units may be ordered directly from Supermicro.
Changing the Power Supply
1. With the system running, unplug the AC power cord from the failed power
supply module.
2. Push and hold the release tab on the back of the power supply.
3. Grasp the handle and pull the power supply out of its bay.
4. Push the replacement power supply module into the empty bay until it clicks
into the locked position.
5. Plug the AC power cord back into the power supply module.
Figure 6-8. Replacing a Power Supply
Handle
Release Tab