Supero SuperServer 4027GR-TR, Руководство пользователя

Страница: 78 / 135

5-28
SUPERSERVER 4027GR-TR/TRT USER'S MANUAL
VGA Enable
Jumper JPG1 allows the user to enable
the onboard VGA connector. The default
setting is 1-2 to enable the connection.
See the table on the right for jumper
settings.
VGA Enable/Disable
Jumper Settings
Jumper Setting De fi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
BMC Enable
Jumper JPB1 allows you to enable
the embedded BMC (Baseboard
Management) Controller to provide IPMI/
KVM support on the serverboard. See
the table on the right for jumper settings.
BMC Enable/Disable
Jumper Settings
Jumper Setting De fi nition
Pins 1-2 BMC Enabled (Default)
Pins 2-3 Disabled
Management Engine (ME) Recovery
Use jumper JPME1 to select ME Firmware
Recovery mode, which will limit resource
allocation for essential system operation
only in order to maintain normal power
operation and management. In the single
operation mode, online upgrade will be
available via Recovery mode. See the
table on the right for jumper settings.
ME Recovery
Jumper Settings
Jumper Setting De fi nition
Pins 1-2 Normal (Default)
Pins 2-3 ME Recovery
Manufacture Mode Select
Close pins 2 and 3 of jumper JPME2 to
bypass SPI
fl ash security and force the
system to operate in the Manufacture
Mode, allowing the user to flash the
system
fi rmware from a host server for
system setting modi fi cations. See the
table on the right for jumper settings.
ME Mode Select
Jumper Settings
Jumper Setting De fi nition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacture Mode