Supero SuperServer 4027GR-TR, Руководство пользователя

Страница: 11 / 135

1-3
Chapter 1: Introduction
Note:
For IPMI con fi guration instructions, refer to the Embedded BMC Con fi guration
User's Guide at http://www.supermicro.com/support/manuals /.
Graphics Controller
The X9DRG-OF/OTF features a Matrox G200 video controller.
1-3 Server Chassis Features
The following is a general outline of the main features of the SC418 server chassis.
System Power
The SC418 chassis model includes four high-ef fi ciency 80-plus Platinum certi fi ed
power supplies, rated at 1600 Watts each for a total of 6400 Watts providing plenty
of power for high wattage GPU cards. The power supplies are 2+2 redundancy.
In the unlikely event your power supply fails, replacement is simple and can be
accomplished without tools.
SATA Subsystem
The SC418 supports up to twenty-four 2.5" hot-swap hard drives. These drives are
connected to a backplane that provides power and control.
Front Control Panel
The SC418 chassis includes a control panel on the handle of the chassis to
control the system. The control panel on the provides you with system monitoring
and control. LEDs indicate system power, HDD activity, network activity, system
overheat and power supply failure. A main power button and a system reset button
are also included.
Cooling System
Eight 9-cm fans are used to cool the system. Fan speed is controlled via IPMI.
Air Shrouds
The SC418 chassis includes two mylar air shrouds that direct the air fl ow where
cooling is needed. Always use the air shrouds included with your server.