Supero SuperServer 4027GR-TR, Руководство пользователя

Страница: 91 / 135

6-6
SUPERSERVER 4027GR-TR/TRT USER'S MANUAL
6-5 Installing the Air Shroud
Air Shrouds
Air shrouds concentrate air fl ow to maximize fan ef fi ciency. Two air shrouds are
included in the system: one for the CPUs and another for the PCI slots. The CPU
air shroud, which sits behind the system fans, should be installed into the chassis
fi rst. These air shrouds do not require screws to install.
Installing the CPU Air Shroud
1. Con fi rm that all fans are in place and working properly.
2. Remove the fan bracket screws (one each on the left and right sides of
chassis.
Note:
There are four serrated cutouts on the left and right sides of
the rear edge of the shroud. Depending on your system con fi guration and
GPU con fi guration, you will have to remove one or two of these cutouts to
route the GPU power and SATA cables through the shroud.
3. Lift the fan bracket up a few inches (be careful not to raise it too far as doing
so may disconnect the fans). With the fan bracket raised, install the CPU air
shroud front side
fi rst. Then place the fan bracket back in its original position.
4. Route the GPU power and SATA data cables through the cutouts and place
the rear edge of the air shroud between the PCI-E PCB and the mounting
plate.
5. Replace the two fan bracket screws to fi nish.
Figure 6-5. CPU Air Shroud Placement
Serrated
cutouts
Fan bracket screw