Supero SuperServer 4027GR-TR Скачать руководство пользователя страница 119

Страница: 119 / 135

7-24

SUPERSERVER 4027GR-TR/TRT USER'S MANUAL

Pending Operation

Use this item to schedule an operation for the security device. The options are

None

, Enable Take Ownership, Disable Take Ownership, and TPM Clear.

Note:

During restart, the computer will reboot in order to execute the pend-

ing operation and change the state of the security device.

Current Status Information:

This item displays the information regarding the

current TPM status.

TPM Enable Status

This item displays the status of TPM Support to indicate if TPM is currently
enabled or disabled.

TPM Active Status

This item displays the status of TPM Support to indicate if TPM is currently ac-
tive or deactivated.

TPM Owner Status

This item displays the status of TPM Ownership.



Intel TXT (LT-SX) Confi guration

Intel TXT (LT-SX) Hardware Support

This feature indicates if the following hardware components support the Intel
Trusted Execution Technology.

CPU

: TXT (Trusted Execution Technology) Feature

Chipset

: TXT (Trusted Execution Technology) Feature

Intel TXT (LT-SX) Confi guration

This feature displays the following TXT con

guration setting.

TXT (LT-SX) Support:

This item indicates if the Intel TXT support is enabled

or disabled. The default setting is

Disabled

Note

: Be sure to format your TPM module before enabling TXT (LT-SX)

support for this feature to work properly.

Intel TXT (LT-SX) Dependencies

For Trusted Execution Technology to work properly, be sure to enable the fea-
tures displayed below:

VT-d Support

: Intel Virtualization Technology with Direct I/O support

Содержание SuperServer 4027GR-TR








































































































































Результаты поиска

Содержание SuperServer 4027GR-TR

Отзывы:

Похожие инструкции для SuperServer 4027GR-TR

Бренды по названию

Популярные бренды

Supero SuperServer 4027GR-TR, Руководство пользователя

Результаты поиска

Содержание SuperServer 4027GR-TR

Отзывы:

Похожие инструкции для SuperServer 4027GR-TR

Бренды по названию

Популярные бренды