Supero Supero SUPERSERVER 5025B-4, Руководство пользователя

Страница: 64 / 138

6-8
S
UPER
S
ERVER 5025B-4/5025B-T Manual
6-5 Power Supply
The SuperServer 5025B-4/5025B-T has a single 400 watt power supply. This power
supply module has an auto-switching capability, which enables it to automatically
sense and operate at a 100V to 220V input voltage.
Power Supply Failure
If the power supply fails, the system will shut down and you will need to replace
the power supply unit. Replacement units can be ordered directly from Supermicro.
See contact information in Chapter 1.
Replacing the Power Supply
First shut down the system, then unplug the power cord.
Remove the chassis cover by pressing the two release buttons on the top of
the chassis (near the front) then push the chassis top rearward about one
inch and lift it off.
To remove the failed power supply, remove the screws at the back that se-
cure it to the chassis and pull the unit straight out with the rounded handle.
Replace the failed hot-swap unit with another PWS-401-2H power supply unit.
Push the new power supply unit into the power bay until you hear a *click*.
Secure the power supply with the screws you removed previously and fi nish
by plugging in the AC power cord.
Push the power button to restart the system.
1.
2.
3.
4.
5.
6.