Supero Supero SUPERSERVER 5025B-4, Руководство пользователя

Страница: 42 / 138

5-10
S
UPER
S
ERVER 5025B-4/5025B-T User's Manual
To Install: Insert mod-
ule vertically and press
down until it snaps into
place. Pay attention to
the bottom notches.
Figure 5-3. DIMM Installation
5-7 Adding PCI Add-On Cards
The SC822S-400LP/SC822TQ-400LP chassis can accommodate all PCI expansion
slots on the X7SB4/X7SBE being populated with low-profi le cards.
Installing an Add-on Card
Begin by removing the shield for the PCI slot you wish to populate.
Fully seat the card into the slot, pushing down with your thumbs evenly on
both sides of the card.
Finish by using a screw to secure the top of the card shield to the chassis.
The PCI slot shields protect the serverboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.
1.
2.
3.
Possible System Memory Allocation & Availability
System Device Size Physical Memory Remaining
(4 GB Total System Memory)
Firmware Hub fl ash memory (System
BIOS) 1 MB 3.99
Local APIC 4 KB 3.99
Area Reserved for the chipset 2 MB 3.99
I/O APIC (4 Kbytes) 4 KB 3.99
PCI Enumeration Area 1 256 MB 3.76
PCI Express (256 MB) 256 MB 3.51
PCI Enumeration Area 2 (if needed)
-Aligned on 256-MB boundary- 512 MB 3.01
VGA Memory 16 MB 2.85
TSEG 1 MB 2.84
Memory available to System BIOS &
OS applications 2.84
DDR2
To Remove: Use your
thumbs to gently push
each release tab out-
ward to free the DIMM
from the slot.