Supero SUPER S2DG2, Руководство пользователя и BIOS

Страница: 34 / 96

SUPER S2DG2/S2DGU/S2DGE/S2DGR
Manual
2-2
1. Installing the metal standoffs:
Attach the metal standoffs to the back of the motherboard tray. Be sure
the location of all the mounting holes for both the motherboard and the
chassis match. Make sure the metal standoffs click in or are screwed
in tightly. There are three additional metal standoffs, specifically for the
Slot 2 motherboard, that are required for mounting the DRM (Dual
Retention Module). See Figure 2-1 for mounting hole locations.
2. Mounting the motherboard onto the motherboard tray:
Except for the four Slot 2 mounting holes, use a Philips screwdriver to
first secure the motherboard onto the motherboard tray.
3. Mounting the fans and the Dual Retention Module
(See Figure 2-2)
:
Before mounting the retention base, you first need to mount the fans in
their proper locations. Screw the base retention parts into the four Slot
2 mounting holes.
Note: The DRM needs to be bolted through the
motherboard to the chassis.
4. Placing the fasteners:
Place a fastener on top of each side of the base, with the arm on top
and the screw holes underneath.
5. Installing caps on the Xeon processor as a handlebar:
When attaching the caps for each Xeon processor, make sure the
directions of the mounting screw holes on each cap face inside so that
the unit can easily slide in. Please test the configuration of the units
before mounting the caps.
6. Securing the processor:
Slide in the single/dual processor(s) making sure it sits on the Slot 2
socket. Then, using screws from the DRM kit, insert four screws and
secure the fastener down tightly.
Removing the Pentium II/III Xeon Processor
To remove the Pentium II/III processor from the motherboard, follow the reverse
of the installation process.
When removing the Pentium II/III processor, avoid pressing down
on the motherboard or components.
!