Supero SUPER S2DG2, Руководство пользователя и BIOS

Страница: 3 / 96

Preface
About This Manual
T h i s m a n u a l i s w r i t t e n f o r s y s t e m h o u s e s , P C t e c h n i c i a n s a n d
knowledgeable PC end users. It provides information for the installation and
use of the SUPER S2DG2/S2DGU/S2DGE/S2DGR motherboard. The SUPER
S2DG2/S2DGU/S2DGE/S2DGR supports Pentium II and III Xeon processors.
The Pentium II/III Xeon processor with the Dual Independent Bus Architecture
is based on the "Slot 2" infrastructure, which will provide the headroom for
future high-performance processors.
Manual Organization
Chapter 1, Introduction, describes the features, specifications and perfor-
mance of the SUPER S2DG2/S2DGU/S2DGE/S2DGR system board, provides
detailed information about the chip set, and offers warranty information.
Refer to Chapter 2, Installation, for instructions on how to install the Pentium
II/III Xeon processor, the retention mechanism and the heat sink support.
This chapter also provides you with instructions for handling static-sensitive
devices. Read this chapter when you want to install DIMM modules and to
mount the system board in the chassis. Also refer to this chapter to connect
the floppy and hard disk drives, IDE interfaces, parallel port and serial ports
as well as the cables for the power supply, reset cable, Keylock/Power LED,
speaker and keyboard.
If you encounter any problems, see Chapter 3, Troubleshooting, which de-
scribes troubleshooting procedures for the video, the memory and the setup
configuration stored in memory. For quick reference, a general FAQ [fre-
quently asked questions] section is can be found here. Instructions are also
included for technical support procedures, for returning merchandise for ser-
vice and for BIOS upgrades using our BBS#.
See Chapter 4 for configuration data and BIOS features.
iii
Preface