Supero 8047R-7JRFT, Руководство пользователя

Страница: 73 / 140

Chapter 5: Advanced Serverboard Setup
5-21
Reset Connector
The reset connector is located on pins 3
and 4 of JF1 and attaches to the reset
switch on the computer chassis. See the
table on the right for pin de
fi nitions.
Reset Button
Pin Defi nitions
(JF1)
Pin# De fi nition
3 Reset
4 Ground
Blue + [OH/Fan Fail/PWR Fail/UID
LED]
Connect an LED cable to pins 7 and
8 of Front Control Panel to use the
Overheat/Fan Fail/Power Fail and UID
LED connections. The Red LED on
pin 7 provides warnings of overheat,
fan failure or power failure. The Blue
LED on pin 8 works as the front panel
UID LED indicator. The Red LED takes
precedence over the Blue LED by
default. Refer to the table on the right
for pin de
fi nitions.
Blue + [OH/Fan Fail/PWR Fail/
UID LED] Pin Defi nitions (JF1)
Pin# De fi nition
7 Red_LED-Cathode/OH/Fan
Fail/Power Fail5.5V.SB
8 Blue_UID LED
OH/Fan Fail/PWR Fail
LED Status (Red LED)
State Indication
Off Normal
On Overheat
Flashing Fan Fail
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Refer to
the table on the right for pin de
fi nitions.
PWR Fail LED
Pin Defi nitions (JF1)
Pin# De fi nition
5 3.3V
6 PWR Supply Fail
NIC1/2 LEDs Pin
Defi nitions (JF1)
Pin# De fi nition
9 NIC2 Activity LED
10 NIC2 Link LED
11 NIC1 Activity LED
12 NIC1 Link LED
NIC1/2 (LAN1) LED Indicators
The NIC (Network Interface Controller)
LED cLED indicator onnections for GLAN
port 1 are located on pins 11 and 12 of
JF1, and those of the GLAN Port 2 are
on pins 9 and 10. Attach NIC LED cables
here to display network activity. Refer to
the table on the right for pin de
fi nitions.