background image

B-2

SUPERSERVER 8047R-7JRFT USER'S MANUAL

Weight

Gross (Bare Bone): 100 lbs. (45.4 kg.)

System Cooling

The system has two 8-cm PWM system cooling fans and four 9-cm colling fans.

System Input Requirements

AC Input Voltage: 100-240V AC auto-range (1000W Output @ 100-120V, 12-
10A, 1200W Output @ 120-140V, 12-10A, 1620W Output @ 180-240V, 10.5-8A)
Rated Input Frequency: 50 to 60 Hz
Ef

fi

 ciency: 80+ (Platinum Level)

Power Supply

Rated Output Power: 1620 Watt (Part# PWS-1K62P-1R)
Rated Output Voltages: 1000W: +12V/84A; +5Vsb/4A

1200W: +12V/100A; +5Vsb/4A 

1620W: +12V/150A; +5Vsb/4A 

Operating Environment

Operating Temperature: 10º to 35º C (50º to 95º F)
Non-operating Temperature: -40º to 70º C (-40º to 158º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

Regulatory Compliance

Electromagnetic Emissions: FCC Class A, EN 55022 Class A, EN 61000-3-2/-3-
3, CISPR 22 Class A

Electromagnetic Immunity: EN 55024/CISPR 24, (EN 61000-4-2, EN 61000-4-3, 
EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11)

Safety: CSA/EN/IEC/UL 60950-1 Compliant, UL or CSA Listed (USA and 
Canada), CE Marking (Europe)

California Best Management Practices Regulations for Perchlorate Materials:
This Perchlorate warning applies only to products containing CR (Manganese 
Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. 
See 

www.dtsc.ca.gov/hazardouswaste/perchlorate

” for further details.

Содержание 8047R-7JRFT













































































































































Отзывы: