Supermicro X5DE8-GG, Руководство пользователя

Страница: 35 / 90

Chapter 2: Installation
2-11
Extra Universal Serial Bus
Headers
T w o a d d i t i o n a l U S B h e a d e r s
(USB2/USB2) have been included
on your motherboard. You will
need a USB cable to use either
connection. Refer to the tables on
the right for pin definitions.
Front P anel Universal Serial Bus Pin
Definitions
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 G round
5 N/A
Pin
Number
Definition
1 +5V
2 P0-
3 P0+
4 G round
5 Key
FPUSB0/FPUSB2
FPUSB1/FPUSB3
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and PS/2
mouse are located on J11. See
the table at right for pin definitions.
(See Figure 2-3 for the locations
of each.)
PS/2 Keyboard
and Mouse Port
Pin Definitions
(J11)
Pin
Number
1
2
3
4
5
6
Definition
Data
NC
G round
VCC
Clock
NC
Serial Ports
The COM1 serial port is located
under the parallel port (see Figure
2-3). COM2 is a header on the
motherboard near the DIMM 4 slot.
See the table on the right for pin
definitions.
Serial Port Pin Definitions
(COM1, COM2)
Pin Number Definition
1 DCD
2 DSR
3 Serial In
4 RTS
5 Serial Out
Pin Number Definition
6 CTS
7 DTR
8 RI
9 G round
10 NC
GLAN 1/2 (Ethernet Ports)
Two G-bit Ethernet ports (desig-
nated GLAN1 and GLAN2) are lo-
cated beside the VGA port on the
IO backplane. These ports ac-
cepts RJ45 type cables.
Note: the X5DEE-M has a single
10/100 Mb port only.