Supermicro SUPERSERVER 6018R-TD, Руководство пользователя

Страница: 7 / 77

1-2 1-3
Chapter 1: Introduction
S
UPER
S
ERVER 6018R-TD User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 6018R-TD lies the X10DRD-L, a dual processor
serverboard based on Intel's C612 chipset. Below are the main features of the
X10DRD-L (see Figure 1-1 for a block diagram of the chipset).
Processors
The X10DRD-L supports single or dual Intel ® Xeon ® E5-2600 v3/v4 Series proces-
sors in LGA2011-3 (Socket R3) sockets. Please refer to the serverboard description
pages on our website for a complete listing of supported processors.
Memory
The X10DRD-L has eight DIMM sockets that can support up to 1 TB of ECC
LRDIMM (Load Reduced DIMMs) or 512 GB of ECC RDIMM (Registered DIMMs)
DDR4-2400/2133/1866/1600 memory. Please refer to Chapter 5 for installing
memory.
SATA
An on-chip SATA controller is integrated into the X10DRD-L to provide a six-port,
SATA 3.0 subsystem, which is RAID 0, 1, 5 and 10 supported. The SATA drives
are hot-swappable units.
Note: Documentation on RAID setup guidelines can be found on our website.
PCI-Expansion
One PCI-E 3.0 x8 slot is included on the X10DRD-L. One expansion card may
be added to the system with the included riser card. (See Section 5-6 for details.)
Rear I/O Ports
The rear I/O panel include one COM port, a VGA (monitor) port, four USB 2.0 ports
and two gigabit Ethernet ports. A dedicated IPMI LAN port is also included.
Onboard Graphics
The X10DRD-L provides onboard graphics with an Aspeed 2400 BMC (baseboard
management controller).
1-3 Server Chassis Features
The following is a general outline of the main features of the SC813TS-441CBP
chassis.
System Power
The SC813TS-441CBP chassis includes a single 440-480W power supply. Power
must be removed from the system when removing the power supply. See Chapter
6 for details.
SATA Subsystem
For the 6018R-TD, the SC813TS-441CBP chassis was designed to support four
SATA hard drives, which are hot-swappable units.
Control Panel
The SC813TS-441CBP's control panel provides important system monitoring and
control information. LEDs indicate power on, network activity, hard disk drive activity
and an information LED. The control panel also includes a main power button and
a system reset button.
Cooling System
The SC813TS-441CBP chassis has an innovative cooling design that features two
10-cm blower fans and one 4-cm fan. Each of these fans plug into a fan header
on the serverboard.