Supermicro SuperServer 6011D, Руководство пользователя

Страница: 47 / 102

Chapter 5: Advanced Motherboard Setup
5-15
Keyboard Wake-Up
The JPWAKE jumper (JP2) is used
together with the Keyboard Wake-
Up function in BIOS. Enable both
the jumper and the BIOS setting to
allow the system to be awakened
up by depressing a key on the key-
board. See Table 5-16 for jumper
settings.
Note:
Your power supply must meet ATX
specification 2.01 or higher and supply 720
mA of standby power to use this feature.
CMOS Clear
Refer to Table 5-15 for instruc-
tions on how to clear CMOS. Al-
ways remove the AC power cord
from the system before clearing
CMOS. The BIOS' "System Setup"
m a y n e e d t o b e r u n a f t e r t h e
CMOS is cleared -- select "Opti-
mized Settings" and "Save and
Exit" the BIOS setup. Please re-
fer to Chapter 7.
Note: For an ATX power supply, you
must completely shut down the sys-
tem, remove the AC power cord, then
use JBT1 to clear CMOS. Replace
JBT1 back to the pin 1-2 position be-
fore powering up the system again.
Do not use the PW_ON connector to
clear CMOS.
Position
1-2
Position
2-3
Normal
CMOS Clear
T a b le 5 -1 5
C M O S C le a r J u m p e r S e ttin g s
(J B T 1 )
Ju m p e r
P o sitio n
1 -2
2 -3
D e fin itio n
N o rm a l
C M O S C le a r
Ju m p e r
P o sitio n
1 -2
2 -3
D e fin itio n
D isa b le d
E n a b le d
T a b le 5 -1 6
K e yb o a rd W a k e -U p
J u m p e r S e ttin g s (J P W A K E )