Supermicro SuperServer 6011D, Руководство пользователя

Страница: 3 / 102

Preface
About This Manual
This manual is written for professional system integrators and PC techni-
cians. It provides information for the installation and use of the Super-
Server 6011D. Installation and maintainance should be performed by expe-
rienced technicians only.
The SuperServer 6011D is a high-end dual processor 1U rackmount server
based on the SC810 1U rackmount server chassis and the P3TDDR, a dual
processor motherboard that supports single or dual Intel Pentium
®
III FCPGA
500 MHz to 1.40 GHz and faster processors with a 512K L2 cache and
single or dual low power Pentium
®
III processors at front side bus speeds
of 133 and 100 MHz and up to 4 GB PC266/200 SDRAM. CPU watchdog
capability is also supported.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the server system and describes the main features of the SUPER P3TDDR
mainboard and the SC810 chassis, which make up the SuperServer 6011D.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
6011D into a rack and check out the server configuration prior to powering
up the system. If your server was ordered without processor and memory
components, this chapter will refer you to the appropriate sections of the
manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as
other LEDs located throughout the system.
iii
Preface