Supermicro SuperServer 6011D, Руководство пользователя

Страница: 40 / 102

5-8
S
UPER
S
ERVER
6011D
User's Manual
Installation
5-6 Adding PCI CARDS
1. 32-bit PCI slot:
The 6011D system board has three 32 bit, 33 MHz, 5V, PCI slots. A riser
card designed specifically for using this slot in a 1U rackmount chassis,
such as the SUPER SERVER SC810, is included with your system. The
riser card allows a single installed PCI card to sit at a 90 degree angle so
it can fit inside the chassis. This riser card accommodates 32bit, 33 MHz
5 V, PCI cards.
2. PCI card installation:
Before installing a PCI add-on card, make certain that you choose the
correct riser card for the type of PCI card you are installing (see step 1).
Begin by removing the I/O shield for the PCI slot. Then fully seat the PCI
card into the riser card and screw it into the metal retention rail (shown
in Figure 2-5). Finally, insert the riser card into the PCI slot on the
motherboard, pushing down with your thumbs evenly on both sides of the
card. (See Figure 5-6 for location.) Finish by using a screw to secure
the top of the card shield to the chassis. The I/O shield protects the
motherboard and its components from electromagnetic interference (EMI)
and aids in proper ventilation, so make sure there is always a shield
covering the slot in the absence of a PCI card.