SuperServer SYS-5039MC-H8TRF User's Manual
76
Serial ATA Port 2 Hot Plug
Set this feature to Enable for hot plug support, which will allow the user to replace a SATA
drive without shutting down the system. The options are Disabled and
Enabled
.
Serial ATA Port 2 Spin Up Device
Set this feature to enable or disable the PCH to initialize the device. The options are
Disabled
and Enabled.
Serial ATA Port 2 SATA Device Type
Use this feature to specify if the SATA port specified by the user should be connected to a
Solid State Drive or a Hard Disk Drive. The options are
Hard Disk Drive
and Solid State
Drive.
Serial ATA Port 4 (JMD2)
This feature displays the information detected on the installed SATA drive on the particular
SATA port on the JMD2 slot.
•
Model number of drive and capacity
•
Software Preserve Support
Serial ATA Port 4 Hot Plug
Set this feature to Enable for hot plug support, which will allow the user to replace a SATA
drive without shutting down the system. The options are Disabled and
Enabled
.
Serial ATA Port 4 Spin Up Device
Set this feature to enable or disable the PCH to initialize the device. The options are
Disabled
and Enabled.
Serial ATA Port 4 SATA Device Type
Use this feature to specify if the SATA port specified by the user should be connected to a
Solid State Drive or a Hard Disk Drive. The options are
Hard Disk Drive
and Solid State
Drive.
PCH-FW Configuration
•
Operational Firmware Version
•
Backup Firmware Version
•
Recovery Firmware Version
•
ME Firmware Features
