SuperServer SYS-5039MC-H8TRF User's Manual
68
Power Limit Value
Use this feature to set the upper limit on the power supplied by the PCIE slot. Press
"+" or "-" on your keyboard to change this value. The default setting is
75
.Power Limit
ScalePower Limit Scale
Use this feature to select the scale used for the slot power limit value. The options are
1.0x
, 0.1x, 0.01x, 0.001x.
Physical Slot Number
Use this feature to set the physical slot number attached to this port. The values are
0-8191. The default value is 2.
Max Payload Size
Use this feature to select the PEG0 maximum payload size. The options are
Auto
, 128,
256 TLP.
Program PCIe ASPM After OpROM
PCIe ASPM, the Active State Power Management for PCI-Express slots, is a power
management protocol used to manage power consumption of serial link devices installed
on PCI-E slots during a prolonged off-peak time. If this feature is set to Enabled, PCI-E
ASMP will be programmed after OPROM. If set to Disabled, the PCI-E ASPM will be
programmed before OPROM. The options are
Disabled
and Enabled.
Internal Graphics
Select Auto to keep an internal graphics device installed on an expansion slot supported
by the CPU to be automatically enabled. The options are Auto,
Disabled
, and Enabled.
VT-d
Select Enabled to activate Intel Virtualization Technology support for Direct I/O VT-d
by reporting the I/O device assignments to VMM through the DMAR ACPI Tables. This
feature offers fully-protected I/) resource-sharing across the Intel platforms, providing the
user with greater reliability, security and availability in networking and data-sharing. The
options are Disabled and
Enabled
.
GNA Device (B0:D8:F0)
Use this feature to enable SA GNA device. The options are
Enabled
and Disabled.
X2APIC Opt Out
The feature "VT-D" must be enabled for this feature to be configurable. Use this feature
to enable or disable X2APIC Opt Out. The options are Enabled and
Disabled
.
PCH-IO
Configuration
