SuperServer SYS-5039MC-H8TRF User's Manual
44
PCI Expansion Cards
The system supports one low-profile PCI-E card in each of the eight nodes with the included
riser card (RSC-RR1U-E16).
Installing an Expansion Card
1. Power-down the node and remove it.
2. Remove the three screws that secure the PCI bracket to the motherboard tray.
3. Remove the PCI slot bracket.
4. Remove the PCI slot shield.
PCI Slot Shield
Figure 3-13. PCI Expansion Card Chassis Slots
5. Insert the expansion card into the riser card, which is pre-installed on the motherboard
(if desired, the riser card may be removed from the motherboard by removing the riser
card screw).
6.
Slide the add-on cards bracket into the PCI card slot and fit it with the opening in the
rear of the node.
7. Close the PCI card slot clip to secure the add-on card.
