46
SuperServer SYS-5039MC-H8TRF User's Manual
Chapter 4
Motherboard Connections
This section describes the connections on the motherboard and provides pinout definitions.
Note that depending on how the system is configured, not all connections are required.
The LEDs on the motherboard are also described here. A motherboard layout indicating
component locations may be found in Chapter 1.
Please review the safety precautions in Appendix B before installing or removing components.
4.1 Power Connections
Power Connector
Connect a 2-pin power supply cable to JPWR1 to provide power to the motherboard.
Power Connector
Pin Definitions
Pin#
Definition
1
Ground
2
P12V
4.2 Headers and Connectors
TPM Header
The JTPM1 header is used to connect a Trusted Platform Module (TPM)/Port 80, which is
available from a third-party vendor. A TPM/Port 80 connector is a security device that supports
encryption and authentication in hard drives. It allows the motherboard to deny access if the
TPM associated with the hard drive is not installed in the system.
Please go to the following link for more information on TPM:
.
Trusted Platform Module Header
Pin Definitions
Pin#
Definition
Pin#
Definition
1
+3.3V
2
SPI_CS#
3
RESET#
4
SPI_MISO
5
SPI_CLK
6
GND
7
SPI_MOSI
8
9
+3.3V Stby
10
SPI_IRQ#
Required Connection
