9
8
SuperServer 5019S-MN4 User's Manual
Chapter 1: Introduction
Chapter 1
Introduction
1.1 Overview
This chapter provides a brief outline of the functions and features of the 5019S-MN4. The
5019S-MN4 is based on the X11SSH-LN4F motherboard and the SC813MFTQC-350CB
chassis.
In additon to the motherboard and chassis, several important parts that are included with the
system are listed below.
1.2 Unpacking the System
Inspect the box the SuperServer 5019S-MN4 was shipped in and note if it was damaged in
any way. If any equipment appears damaged, please file a damage claim with the carrier
who delivered it.
Decide on a suitable location for the rack unit that will hold the server. It should be situated
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and
electromagnetic fields are generated. It will also require a grounded AC power outlet nearby.
Be sure to read the precautions and considerations noted in Appendix B.
Main Parts List
Description
Part Number
Quantity
Air Shroud
MCP-310-19007-0N
1
Heatsink (passive)
SNK-P0046P
1
Riser Card
RSC-RR1U-E16
1
1.3 System Specifications
The following table provides you with an overview of the main features and specifications of
the 5019S-MN4. Please refer to Appendix C for additional specifications.
System Specifications
Motherboard
X11SSH-LN4F
Chassis
SC813MFTQC-350CB
CPU
Intel
®
E3-1200 v5 and 6th Gen Core i3, Pentium and Celeron processors
Socket Type
LGA 1151 (H4)
Memory
Four 288-pin DIMM slots to support up to 64 GB of 72-bit DDR4 unbuffered ECC 2133/1866/1600/1333MHz
SDRAM
Chipset
C236 chipset
Expansion Slots
One PCI Express 3.0 x4 in x8 slot (PCH Slot 4)
One PCI Express 3.0 x8 (CPU Slot 5)
One PCI Express 3.0 x8 in x16 slot (CPU Slot 6)
One M.2 Mini PCI Express 3.0 x2 connector
Hard Drives
Four hot-swap SATA hard drives
Power
Single 350W power supply
Form Factor
1U rackmount
Dimensions
(WxHxD) 17.2 x 1.7 x 19.85 in. (437 x 43 x 504 mm)
