Supermicro SuperServer 5019S-MN4, Руководство пользователя

Страница: 46 / 61

Chapter 6: BIOS
89 88
SuperServer 5019S-MN4 User's Manual
Configuration Address Source (Available when the item above - Update IPMI LAN
Configuration is set to Yes)
Use this item to select the IP address source for this computer. If Static is selected, you will
need to know the IP address of this computer and enter it to the system manually in the field.
If DHCP is selected, AMI BIOS will search for a DHCP (Dynamic Host Configuration Protocol)
server attached to the network and request the next available IP address for this computer.
The options are
DHCP
and Static.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal and in
dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each three-
digit number is separated by dots and it should not exceed 255.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses are 6 two-digit
hexadecimal numbers.
Router IP Address
This item displays the Router IP address for this computer. This should be in decimal and in
dotted quad form (i.e., 172.31.0.1).
6.6 Security
This menu allows the user to configure the following security settings for the system.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at bootup or upon entering the BIOS Setup utility. The options are
Setup and Always.
Administrator Password
Press Enter to create a new, or change an existing Administrator password.

Secure Boot Menu
This section displays the contents of the following secure boot features:
•
System Mode
•
Secure Boot
•
Vendor Keys
Secure Boot
Use this item to enable secure boot. The options are Disabled and Enabled.
Secure Boot Mode
Use this item to select the secure boot mode. The options are Standard and Custom .
CSM Support
Select Enabled to support the EFI Compatibility Support Module (CSM), which provides
compatibility support for traditional legacy BIOS for system boot. The options are
Enabled
and Disabled.