Supermicro SuperServer 2028BT-HTR+, Руководство пользователя

Страница: 78 / 128

6-20
SuperServer 2028BT-Hxxx User’s Manual
Port 0 ~ Port 3 sSATA Device Type
Use this item to specify if the sSATA port specified by the user should be
connected to a Solid State drive or a Hard Disk Drive. The options are Hard
Disk Drive and Solid State Drive.
*If the item above "Configure sSATA as" is set to IDE, the following items will
display:
sSATA Port 0~ Port 3
This item indicates that an sSATA port specified by the user is not installed or
not detected.
Port 0 ~ Port 3 sSATA Device Type (Available when a SATA port is
detected)
Use this item to specify if the sSATA port specified by the user should be
connected to a Solid State drive or a Hard Disk Drive. The options are H ard
Disk Drive and Solid State Drive.
*If the item above "Configure sSATA as" is set to RAID, the following items will
display:
sSATA Support Aggressive Link Power Management
When this item is set to Enabled, the sSATA AHCI controller manages the power
usage of the SATA link. The controller will put the link to a low power state when
the I/O is inactive for an extended period of time, and the power state will return
to normal when the I/O becomes active. The options are
Disabled
and Enabled.
sSATA RAID Option ROM/UEFI Driver
Select EFI to load the EFI driver for system boot. Select Legacy to load a legacy
driver for system boot. The options are Disabled, EFI, and
Legacy .
SATA/sSATA RAID Boot Select
Select SATA Controller to boot the system from a SATA RAID device. Select
sSATA Controller to boot the system from a S-SATA RAID device. Select Both
to boot the system either from a SATA RAID device or from an sSATA RAID
device. Please note that the option-Both is not supported by the Windows Server
2012/R2 OS. The options are Both, SATA Controller, and
sSATA Controller .
sSATA Port 0~ Port 3
This item displays the information detected on the installed sSATA drives on
the particular sSATA port.
•
Model number of drive and capacity
•
Software Preserve Support